Electric sightseeing car driving method to save electricity

1. Avoid sudden acceleration and start. When starting with sudden acceleration, the current of the high-voltage circuit will be very large. Frequent sudden acceleration and start will affect the life of the motor controller and power battery, and shorten the driving range. Avoid sudden stops.

2. Sudden braking and stopping should be avoided as much as possible, because sudden braking will not only accelerate the grinding of the brake lining, but also the current feedback caused by emergency braking will affect the motor controller, affecting the driving range and the life of the motor controller.

3. Maintain a stable driving speed. When road and traffic conditions permit, the vehicle should maintain a stable driving speed. When the vehicle starts and accelerates to a certain speed, you can relax the accelerator pedal appropriately and maintain the current speed. Maintain normal tire pressure. Insufficient tire pressure will increase rolling resistance and increase power consumption, so normal tire pressure should be maintained.

4. Perform battery maintenance and care in a timely manner. Check the battery surface for cleanliness before charging, and make sure there is no debris. If dust or acid is found on the battery, it should be scrubbed with soda water in time.Check the electrolyte surface height after each charge, and add deionized water or electrolyte in time.Check the connection once a week to see if it is loose or damaged, and adjust or replace it in time.Check the battery voltage, electrolyte density, and liquid level at least once a week.Measure and record the voltage and electrolyte density of all single cells after charging every month. If there are many differences from previous measurements, please check in time.